Specialist Offshore Dirty Oil Pack 150LPM

Availability: Rental, Sale

The Specialist Offshore Services dirty oil pack allows the user peace of mind when using tools that typically contaminate the ROV’s hydraulics.

The Dirty Work Pack (DWP) uses a reliable bent axis piston motor on the input side, or clean oil side. Coupled to this, via a compensated housing, is a proven gear pump. The gear pumps have proven reliable to normally unacceptable levels of contaminants, and generally give warning of imminent failure by the pressure slowly dropping. Catastrophic failure is rare with gear pump, limiting possible contamination.

The gear pump was chosen to be easily replaceable, and cost effective on the client. Each new job sees the unit shipped with a new pump. To ensure protection of the pump, is a low pressure filter element, meeting the minimum specifications of the pump. On the output of the pump is a high pressure filter, which is used to ensure that should the unit be pushed past it’s operating envelope, the users equipment is protected.

Driving the unit is a custom manifold, specifically made to minimise fittings, setting up and installation time. The manifold also allows the user to lower flow specifications should the user need to couple it to a certain sized hydraulic specification, and still meet pressure requirements.

  • Pilot operated ON/OFF, use only as needed
  • 125 µm LP filter, 10 µm HP filter
  • Mineral oil ISO32-68 compatible
  • Industry standard control cartridges
  • Clean oil side input flow rate maximum 180LPM, 210 bar
  • Output dirty oil side maximum flow rate 150LPM, 200 Bar
  • Weight 80kg in air, 65kg in water
  • Mounting 650x700x330mm

Description

The Specialist Offshore Services dirty oil pack allows the user peace of mind when using tools that typically contaminate the ROV’s hydraulics.